How to Fix LCD Display Issues on Samsung Clone J7 with Flash File
If you have a Samsung Clone J7 smartphone that has problems with the LCD display, such as flickering, black screen, or dead pixels, you may need to flash a new firmware file to fix it. Flashing a firmware file is a process of installing a new software version on your device, which can also remove any viruses, malware, or bugs that may cause display issues.
In this article, we will show you how to flash the Samsung Clone J7 Flash File 2nd Update Lcd Fix Mt6580 8.1 Firmware, which is a custom ROM that can improve the performance and stability of your device, as well as fix the LCD display problems. This firmware file is compatible with the Samsung Clone J7 model that has the MT6580 chipset and runs on Android 8.1 Oreo operating system.
Before you proceed with the flashing process, you will need to prepare some things first:
A Samsung Clone J7 smartphone with at least 50% battery charge.
A USB cable to connect your device to your computer.
A computer with Windows OS and SP Flash Tool installed. You can download SP Flash Tool from here.
The Samsung Clone J7 Flash File 2nd Update Lcd Fix Mt6580 8.1 Firmware file. You can download it from here.
A backup of your personal data, such as contacts, messages, photos, etc. Flashing a firmware file will erase all your data on your device.
Once you have everything ready, you can follow these steps to flash the firmware file on your Samsung Clone J7:
Extract the firmware file that you downloaded on your computer. You will get a folder with several files inside, including a scatter file.
Launch SP Flash Tool on your computer and click on the \"Download\" tab.
Click on the \"Choose\" button next to the \"Scatter-loading File\" option and browse to the folder where you extracted the firmware file. Select the scatter file and click \"Open\".
The SP Flash Tool will load all the files from the firmware folder. Make sure all the boxes are checked and the files are correctly assigned.
Click on the \"Download\" button at the top of the SP Flash Tool.
Turn off your Samsung Clone J7 and remove the battery if possible. Then connect it to your computer using the USB cable.
The SP Flash Tool will detect your device and start flashing the firmware file. You will see a progress bar and a green circle when the flashing is done.
Disconnect your device from your computer and put back the battery if you removed it. Then turn on your device and wait for it to boot up.
Congratulations! You have successfully flashed the Samsung Clone J7 Flash File 2nd Update Lcd Fix Mt6580 8.1 Firmware on your device. You should now be able to enjoy a better LCD display quality and performance on your Samsung Clone J7 smartphone. 061ffe29dd