VNC Scanner GUI V1.2.43
How to Use VNC Scanner GUI v1.2.43 to Scan and Connect to Remote Computers
VNC Scanner GUI v1.2.43 is a tool that allows you to scan IP addresses for open ports and connect to them using VNC Viewer. VNC (Virtual Network Computing) is a protocol that enables remote access and control of another computer's desktop. VNC Scanner GUI v1.2.43 is compatible with Windows, Mac, Linux, and Unix systems.
In this article, we will show you how to use VNC Scanner GUI v1.2.43 to scan and connect to remote computers in a few simple steps.
Step 1: Download and Install VNC Scanner GUI v1.2.43
You can download VNC Scanner GUI v1.2.43 from this link. After downloading, extract the zip file and run the vnc.exe file.
Step 2: Set the IP Range and Port
In the VNC Scanner GUI window, enter the IP range that you want to scan in the -I field. For example, if you want to scan from 192.168.0.1 to 192.168.0.255, enter 192.168.0.1-192.168.0.255.
In the Port field, enter the port number that you want to scan for open VNC connections. The default port for VNC is 5900, but you can change it if you know the port number of the target computer.
In the -p field, enter the same port number as in the Port field.
Step 3: Start Scan and Parse Results
Click on Start Scan to begin scanning the IP range for open ports. A command prompt window will open and show you the progress of the scan.
When the scan is finished, click on Start Parser to generate a list of IPs.txt file that contains the IP addresses of the computers that have open VNC ports.
Step 4: Connect to Remote Computers Using VNC Viewer
To connect to a remote computer using VNC Viewer, you need to download and install VNC Viewer from this link.
After installing VNC Viewer, open it and enter the IP address of the remote computer that you want to connect to in the address bar.
If the remote computer requires authentication, enter the username and password that you have or that you can guess.
Click on Connect to establish a connection and view and control the remote desktop.
VNC Scanner GUI v1.2.43 is a useful tool that can help you scan and connect to remote computers using VNC Viewer. It can be used for various purposes such as hacking, troubleshooting, or learning.
However, you should be careful not to use it for illegal or malicious activities, as it may violate the privacy and security of other users.
How to Scan Multiple Ports with VNC Scanner GUI v1.2.43
If you want to scan multiple ports with VNC Scanner GUI v1.2.43, you can use the -P option to specify a range of ports. For example, if you want to scan from port 5900 to port 5905, enter 5900-5905 in the -P field.
This will scan each port in the range and generate a list of IPs.txt file that contains the IP addresses and ports of the computers that have open VNC connections.
You can then use VNC Viewer to connect to any of the IP addresses and ports in the list.
How to Scan Faster with VNC Scanner GUI v1.2.43
If you want to scan faster with VNC Scanner GUI v1.2.43, you can increase the number of threads that are used for scanning. The default number of threads is 1000, but you can change it to a higher value if your computer can handle it.
To change the number of threads, enter the desired value in the -t field. For example, if you want to use 2000 threads, enter 2000 in the -t field.
This will speed up the scanning process by using more resources of your computer.
How to Scan Stealthily with VNC Scanner GUI v1.2.43
If you want to scan stealthily with VNC Scanner GUI v1.2.43, you can use the -s option to enable stealth mode. This will make the scanner send only one packet per IP address and port, instead of three packets as in normal mode.
This will reduce the chances of being detected by firewalls or antivirus software on the target computers.
However, this will also reduce the accuracy of the scan results, as some open ports may not be detected by one packet.
To enable stealth mode, enter -s in the -s field.